Indoor Christmas decorations are a puzzle of space, floors and ceilings. For the bigger picture, start with our complete guide to Christmas decorations and lights using MEWPs. This article focuses on what changes once you move inside a building. If your project centres on a tall tree, our guide to large Christmas tree installation using MEWPs goes deeper on that job.
Which MEWP is best for indoor Christmas decorations?
Push-arounds suit narrow homes and halls, mast lifts suit compact spaces such as churches and shops, and electric scissor lifts suit large atria and lobbies. All are electric or manually moved, so they run quietly without exhaust fumes. Check doorways, floor loading and floor finish before hire. For delicate or historic floors, an electric spider lift spreads the load through its tracks and stabiliser pads.
- Indoors, electric and manually moved machines are the norm: push-arounds, mast lifts, electric scissor lifts and, in some cases, electric booms.
- Door widths, lift sizes, floor loading and floor finish matter more than maximum height.
- Work from the ceiling down, and keep fire safety equipment clear of decorations.
- In occupied buildings, plan for barriers, ground support and out-of-hours work.
- Where the floor is delicate, an electric spider lift can be the safest option. Check the track type and stabiliser loads, and use protection boards.
Table of Contents
- Why Does Indoor Christmas Decorating Need Different Access Equipment?
- The Best MEWPs for Indoor Christmas Decorations
- Indoor Machine Selection Guide
- Floor and Building Checks Before You Hire
- Planning the Decorating Sequence
- Working in Occupied Buildings
- Making the Most of Your Hire
- Dressing Different Indoor Features
- Keep Indoor Decorations Light
- Conclusion
- Get in Touch with AFI Rentals
- Frequently Asked Questions
Explore the Christmas MEWP Guides
Explore the related guides for more advice on planning indoor and outdoor Christmas decoration projects:
- Complete guide to Christmas decorations and lights using MEWPs
- Installing outdoor Christmas lights with cherry pickers
- Commercial Christmas decorations using MEWPs
- Large Christmas tree installation using MEWPs
- Christmas light displays and event decorations with MEWPs
- Which MEWP is best for Christmas decorations and light installation
- Cherry picker and MEWP hire costs for Christmas lights
- Safe Christmas decoration installation using MEWPs
- MEWP types for Christmas decorations: where each machine works best
Why Does Indoor Christmas Decorating Need Different Access Equipment?
Indoor sites are enclosed, finished and often full of people. Machines with exhaust emissions are unsuitable, floors can be marked or damaged by the wrong tyres, and the route from the loading bay to the work area may include doors, corridors and lifts. For these reasons, indoor Christmas work usually relies on compact, quiet electric machines.
The Best MEWPs for Indoor Christmas Decorations
Push-arounds, often called PAVs, are lightweight platforms that are moved by hand. Many are designed to pass through standard doorways, making them a strong choice for hallways, stairwell landings, small shops, and homes. They are well suited to hanging ceiling decorations and fitting lights at moderate heights.
A mast lift rises vertically on a compact mast with a small footprint. It works well in churches, school halls, reception areas and retail units where you need to get close to a ceiling or feature wall without much room around the machine.
An electric scissor lift gives a larger platform and a straight vertical lift, so decorators can carry more material and work without constantly repositioning. They suit hotel lobbies, restaurants, function rooms and shopping centre malls, provided the floor is level and strong enough.
Electric booms for obstructed areas
Where something stands between the machine and the work, such as a staircase, a display or a balcony, an electric articulating boom lift can reach up and over. AFI describes articulating booms as ideal for both internal and external work where height and outreach are needed.
Electric spider lifts for delicate floors.
Sometimes the problem is the floor rather than the height. A tracked spider lift spreads its weight over its tracks and stabiliser pads, and electric (lithium) models produce no exhaust fumes, so they suit churches, period halls, atria, and venues with marble, stone, terrazzo, or timber floors that wouldn't welcome a heavy wheeled machine. Compact models can pass through standard doorways, but check the machine's width and the route before booking.
Always ask about ground pressure, whether the tracks are non-marking, and the loading on each stabiliser pad. Put protection boards under the pads, and have the building manager confirm the floor's rated loading. AFI's tracked fleet runs from 11m to 40m and includes lithium, hybrid, and diesel models, so ask for the electric option for indoor use.
Indoor Machine Selection Guide
Use this table as a starting point for matching the space you are decorating to a machine. Confirm the final choice against your own survey and the machine specification. For model details, see our guide to MEWP types for Christmas decorations, which explains where each machine works best. Van mounts and truck mounts are road-going machines for outdoor work, and our guide to installing outdoor Christmas lights with cherry pickers covers them.
| Indoor Space | Typical Decoration | Machine to consider |
| Home hallway or stairwell void | Garlands, pendant lights, tall tree | Push-around |
| Church or school hall | Ceiling banners, wall displays, lighting | Mast lift or push-around |
| Hotel lobby or restaurant | Hanging features, wreaths, ceiling lights | Electric scissor lift |
| Shopping centre mall | Suspended installations, large displays | Electric scissor lift |
| Space with obstacles below the work | Lighting over displays or stairs | Electric articulating boom |
| Venue with a delicate or historic floor | Trees, pendant displays, wall and window lighting | Electric spider lift with protection boards |
“Measure the narrowest point on the machine's route, not just the room itself. A lift, a corridor or a door frame is where indoor hires most often get stuck.”
Floor and Building Checks Before You Hire
- Floor loading. MEWPs can weigh well over a tonne. Check the floor can carry the machine, especially on upper floors, raised floors or over basements.
- Floor finish. Machines with non-marking tyres are available for polished, tiled or specialist floors. Ask for them where marking is a concern, and use floor protection where needed.
- Route and dimensions. Check door widths, corridor turns, lift sizes and thresholds against the machine's published dimensions.
- Floor level. Scissor lifts and mast lifts need a level, firm surface. Steps, ramps and soft floor coverings can all be an issue.
- Charging. Electric machines need a mains supply to recharge. Check socket locations, and avoid trailing leads across walkways.
Planning the Decorating Sequence
A sequence prevents repeat visits and protects completed work. A reliable order is to start at the highest point and finish at the lowest.
- Fit ceiling fixings, hanging points and lighting runs first.
- Hang suspended decorations and garlands next.
- Dress walls, columns and features at mid-height.
- Complete floor-level displays last, once the machine has been removed.
Keep decorations in a tray or bag on the platform rather than in your hands, and avoid overloading the platform with materials you will not use on that lift.
Working in Occupied Buildings
Most indoor work happens in places that are open or about to open. Where possible, schedule installation outside opening hours. If work must overlap with normal use, barrier off the work area, use signage, and have a ground person watching the machine. Platform movement and overhead work are hazards to anyone passing below.
Decorations must also respect the building's fire safety measures. Do not cover or hang material from sprinkler heads, smoke detectors, emergency lighting or fire exit signs, and keep escape routes clear of the machine and the equipment.
“Walk the route with the building's facilities or fire officer before delivery day. Five minutes of checking is cheaper than a stuck machine or a blocked fire exit.”
Making the Most of Your Hire
Indoor jobs are often shorter than outdoor ones, but they still benefit from preparation. Test lights on the floor before taking them up, label cables by zone, and have decorations sorted in the order they will be used. A prepared team can often complete a large interior in far fewer lifts.
Dressing Different Indoor Features
- Stairwell voids and double-height halls: hang pendant garlands or light drops from the top, using a push-around or mast lift that can stand on the lower floor.
- Atrium balconies and galleries: decorate the railings and soffits from a scissor lift on the ground floor, rather than leaning out over the edge.
- Columns and feature walls: wrap lights in even spirals from the top down, moving the platform a little at a time.
- Windows and glazed frontages: fit lights and window displays from the inside where the machine can stand close to the glass.
Keep Indoor Decorations Light
Ceilings, suspended grids and fittings are rarely designed to carry heavy loads. Use lightweight materials, spread weight across several fixing points and never hang decorations from sprinkler pipes, cable trays or lighting tracks unless they have been approved for it. If the hanging point is not obviously designed for a load, ask the building owner before you use it.
Conclusion
Good indoor Christmas decorations depend on a simple chain: measure the route, protect the floor, choose a compact electric machine and decorate from the ceiling down. Plan around the people who use the building and keep fire safety equipment clear, and the work will be quicker, quieter, and safer than from a ladder.
FAQs
Can a scissor lift be used on any indoor floor?
Not necessarily. The floor must be level, firm, and strong enough to support the machine's weight. Ask about floor loading before hire, especially on upper storeys or suspended floors.
Will a MEWP damage my floor?
It can if you use the wrong machine or tyres. Non-marking tyres and floor protection reduce the risk on polished, tiled or specialist surfaces, so mention the floor type when you enquire. An electric spider lift spreads its weight through tracks and stabiliser pads, which can help on delicate floors, but check its ground pressure and still use protection boards.
Are electric MEWPs noisy or smelly?
Electric machines run on batteries, produce no exhaust fumes, and are generally much quieter than diesel machines. That is why they are the standard choice for indoor use.
How do I know whether the machine will fit through my doors?
Compare the machine's width and height with the narrowest door or corridor on the route, and allow clearance on both sides. The hire specification lists the dimensions, and the AFI team can confirm for a specific model.
How do I charge an electric MEWP while indoors?
Plug it into a suitable mains socket using the supplied charger. Position the machine so leads do not cross walkways, and charge it when it is not in use so it is ready for the next shift.
Can I use a MEWP in a home with a narrow hallway or stairs?
A push-around is designed for that sort of space, but it still needs a flat floor. Stairs are not a route for a MEWP, so the work area must be on the same level as the entrance.
What is the best option for decorating high ceiling lights and chandeliers?
A scissor lift gives a roomy platform for working directly under a fixture, while a push-around suits smaller spaces. Choose based on how much room there is to position the machine below the item.
Do I need permission to hang decorations from the ceiling?
If the building is rented or managed by someone else, yes. Ask the landlord or facilities manager what the ceiling and fixings can safely support, and where fixing is not permitted.
Can a MEWP be used while the building is open to the public?
It can, with precautions. Use barriers, signage and a ground person, and check the risk assessment covers people passing below. Out-of-hours work is easier where it is possible.
How long does it take to decorate an indoor space with a MEWP?
It depends on the space size, the amount of decoration, and the number of people working. A small hall can take a few hours, while a large atrium may take days, so plan based on a survey rather than guesswork.



